Auto news on Youtube Feb 8 2019

OK, so this is a sports car

You lean on the door sill

and this is how you get out of the car

What's so cool about you is that you all actually are friends

And not only because of the cars

Instead, the cars are a common passion of all of you

And you all have such different preferences

One is into patina and wants to leave the car as it is

Another on loves to wrench on his car

and to change up everything

That's when wrenching becomes more fun than actually driving the car

OK, now I see the problem

Well then, Bremi, go drive the car now

Do you like it?

OK bye

For more infomation >> Vom tiefen AUDI zum alten VW | Plattekarre der Film by FLGNTLT - Duration: 4:07.

-------------------------------------------

Come sostituire molle di sospensione posteriori su AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 2:33.

For more infomation >> Come sostituire molle di sospensione posteriori su AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 2:33.

-------------------------------------------

Hvordan bytte bak støtdemper der på AUDI A3 1 (8L1) [BRUKSANVISNING AUTODOC] - Duration: 4:40.

For more infomation >> Hvordan bytte bak støtdemper der på AUDI A3 1 (8L1) [BRUKSANVISNING AUTODOC] - Duration: 4:40.

-------------------------------------------

Kaip pakeisti galiniai pakabos spyruoklė AUDI A3 1 (8L1) [PAMOKA AUTODOC] - Duration: 2:33.

For more infomation >> Kaip pakeisti galiniai pakabos spyruoklė AUDI A3 1 (8L1) [PAMOKA AUTODOC] - Duration: 2:33.

-------------------------------------------

Hvordan bytte bak bremseskiver der på AUDI A3 1 (8L1) [BRUKSANVISNING AUTODOC] - Duration: 4:12.

For more infomation >> Hvordan bytte bak bremseskiver der på AUDI A3 1 (8L1) [BRUKSANVISNING AUTODOC] - Duration: 4:12.

-------------------------------------------

Jak vyměnit uložení tlumičů na AUDI A3 1 (8L1) [NÁVOD AUTODOC] - Duration: 4:44.

For more infomation >> Jak vyměnit uložení tlumičů na AUDI A3 1 (8L1) [NÁVOD AUTODOC] - Duration: 4:44.

-------------------------------------------

Cum se înlocuiește amortizoare din spate AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 4:40.

For more infomation >> Cum se înlocuiește amortizoare din spate AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 4:40.

-------------------------------------------

Cum se înlocuiește arc de suspensie din spate AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 2:33.

For more infomation >> Cum se înlocuiește arc de suspensie din spate AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 2:33.

-------------------------------------------

Kuinka vaihtaa jousijalan tukilaakeri AUDI A3 1 (8L1) -merkkiseen autoon [OHJEVIDEO AUTODOC] - Duration: 4:44.

For more infomation >> Kuinka vaihtaa jousijalan tukilaakeri AUDI A3 1 (8L1) -merkkiseen autoon [OHJEVIDEO AUTODOC] - Duration: 4:44.

-------------------------------------------

How to replace rear shock absorber on AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 4:39.

Required Tools: Wire brush

WD-40 spray Drive socket # 16

Combination spanner #16 Torque wrench

Adjustable wrench Wheel impact socket #17

Hydraulic transmission jack Wheel chock

1. Unscrew the wheel bolts. Use wheel impact socket #17.

AUTODOC recommends: To avoid injury, hold up the wheel when unscrewing the bolts.

2. Raise the rear of the car and secure on supports.

3. Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.

4. Support the arm. Use a hydraulic transmission jack.

5. Unscrew the upper fastener of the shock absorber. Use a drive socket #16.

6. Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16.

AUTODOC recommends: To avoid injuries, hold the shock absorber when undoing the fastening bolts.

7. Remove the support from under the rear arm.

8. Remove the shock absorber.

9. Remove the protective cap of the shock absorber mount.

10. Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.

11. Remove the shock absorber piston rod fastening. Use a combination spanner #16. Use an adjustable wrench.

12. Remove the shock absorber mount, boot and bump stop.

AUTODOC recommends: Τhoroughly examine the shock absorber mount, dust boot, bump stop. Replace them if necessary. Before installing a new shock absorber you should pump it manually 3-5 times.

13. Install the boot and a bump stop onto the shock absorber.

14. Install the top mount on the new shock absorber and secure it. Use a combination spanner #16. Use an adjustable wrench. Use a torque wrench. Tighten it to 25 Nm torque.

15. Place the shock absorber in the wheel arch and fasten it.

16. Install the shock absorber mount using the center hole as a guide.

17. Tighten the top shock absorber fastening. Use a drive socket #16. Use a torque wrench. Tighten it to 50 Nm torque.

18. Support the arm. Use a hydraulic transmission jack.

19. Tighten the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 90 Nm torque.

20. Remove the support from under the rear arm.

21. Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

22. Screw in the wheel bolts. Use wheel impact socket #17.

AUTODOC recommends: To avoid injury, hold up the wheel when screwing in the fastening bolts.

23. Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 120 Nm torque.

For more infomation >> How to replace rear shock absorber on AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 4:39.

-------------------------------------------

How to replace rear brake discs / rear brake rotors on AUDI A3 1 (8L1) [TUTORIAL AUTODOC] - Duration: 4:11.

1. Unscrew the brake fluid reservoir cap.

Required Tools: Wire brush

WD-40 spray Brake cleaner

Copper grease Combination spanner #13

Combination spanner #15 Drive socket # 13

Torx bit T30 Torque wrench

Wheel impact socket #17 Rubber mallet

Crow bar Wheel chock

2. Unscrew the wheel bolts. Use wheel impact socket #17.

AUTODOC recommends: To avoid injury, hold up the wheel when unscrewing the bolts.

3. Raise the rear of the car and secure on supports.

4. Disconnect the ABS sensor electric socket. Disconnect the brake pad wear sensor plug. Remove the ABS sensor connector. Remove the connector of the brake pad wear sensor.

Please note! Some cars are not equipped with the brake pad wear sensor.

5. Spread the brake pads. Use a crowbar.

6. Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.

7. Unscrew the brake caliper fastening.

Use a combination spanner #13. Use a combination spanner #15.

8. Remove the brake caliper.

AUTODOC recommends: Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent

depressurization of the brake system. Make sure that the brake caliper is not hanging on the brake hose.

Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder,

and brake fluid leakage and depressurization of the system may occur.

9. Press in the brake caliper piston. Use brake caliper wind back tool.

10. Unscrew the brake disc mounting bolts and remove it. Use Torx T30.

AUTODOC recommends: If necessary, use a rubber mallet.

11. Clean the hub. Use a wire brush. Use a brake cleaner.

AUTODOC recommends: After applying the spray, wait a few minutes.

12. Treat the contacting surface. Use copper grease.

13. Remove anti-corrosion grease from the new brake disk. Use a brake cleaner.

AUTODOC recommends: After applying the spray, wait a few minutes.

14. Install the brake disc. 15. Tighten the brake disc fastening. Use Torx T30.

Use a torque wrench. Tighten it to 9 Nm torque.

16. Install the brake pads.

17. Install the brake caliper and fix it.

18. Tighten the brake caliper bracket. Use a combination spanner #15.

Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.

19. Connect the ABS sensor electric socket. Connect the brake pad wear sensor plug.

AUTODOC recommends: Without starting the engine, press the brake pedal several times until you feel significant resistance.

20. Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends: After applying the spray, wait a few minutes.

21. Treat the surface where the brake disc contacts the wheel rim. Use copper grease.

22. Screw in the wheel bolts. Use wheel impact socket #17.

AUTODOC recommends: To avoid injury, hold up the wheel when screwing in the fastening bolts.

23. Lower the car and working in a cross order, tighten the wheel bolts.

Use a torque wrench. Tighten it to 120 Nm torque.

AUTODOC recommends: Check the brake fluid level in the expansion tank and refill if necessary.

24. Tighten the brake fluid reservoir cap.