Hello friends, let's fix your reverse light. So that it looks like this.
You will need a 10mm wrench, plilips head screwdriver and flathead screwdriver.
Your Elantra should come with a flathead screwdriver.
Let's get started.
Open the driver side door.
Release the trunk.
In the trunk, lift the trunk carpet.
Now see this is where all the tools are.
Get the screwdriver.
Now there are 8 clips on the trunk that we need to take off.
There are 2 parts of the clip. Pull the middle part out using the screwdriver.
Take all of the other 7 clips off and keep them somewhere safe.
Now pry out that handle cover using the flathead screwdriver.
You will see philips head screws now.
Use the philipshead screwdriver to take them both off.
Now the trunk cover should come right off.
Now we need to disconnect the electrical connector.
Pinch it on the bottom and pull it out.
Now use the 10mm wrench to unscrew the three nuts.
Just be careful, the metal there is a little sharp. You don't want to get hurt while you are unscrewing the nuts.
Now that is the trunk and that is the tail-light.
Put one hand right there and pull it out straight.
You may have to wiggle it a little.
That grey bulb holder is the reverse light bulb holder.
Twist it left to open it.
You may have to wiggle it a little.
To take out the bulb, just pull it out.
Check the video description for the correct bulb size.
Get the new bulb and just push it in the bulb holder.
Now put the bulb holder back in place and twist it right to lock it in position.
Put the tail-light back.
Need to align the screws with the three holes in the trunk.
Now slide it in. It should sit tight.
Put some pressure on the tail-light from outside to help with putting the nuts back.
Now use the 10 mm wrench to screw the nuts back.
Connect the electrical connector by pushing it in place. It just goes in one way.
Now those clips you took off, this is not the right way when you are putting them back.
Check the middle part is pulled out when you are putting them back.
This is good.
Get 2 clips and the trunk cover and put two lower clips in place.
Now put all the other clips in place.
Put the two philips head screws back.
Press the handle cover close.
Let's go test it out.
If you like this video, please subscribe to this channel for more videos like this.
Thank you for watching.




For more infomation >> Hyundai i20 lpg G3 wegenbelasting 43€ tanken 58ct/l + fabrieksgarantie 03/2020 !!! - Duration: 0:52.
For more infomation >> Hyundai i10 Airco-Zeer nette auto-2de eigenaar - Duration: 1:06.
For more infomation >> Hyundai Tucson - Duration: 1:11.
For more infomation >> Hyundai Getz 1.1i GL Young | TREKHAAK | CPV | RADIO/CD + AUX/USB | NIEUWE APK + GARANTIE - Duration: 0:52.
For more infomation >> Hyundai Atos 1.1i Active Young Stuurbekrachtiging Apk Jan, 2020 - Duration: 1:11. 
Không có nhận xét nào:
Đăng nhận xét