Use a combination spanner No.19. Loosen the lock nut securing the tie rod end to the tie rod.
Use a drive socket No.17. Loosen the lock nut securing the tie rod end to the tie rod.
Use a ball joint remover. Using a special tool push the steering rod end out of the steering knuckle.
Screw the end out of the tie rod.
Screw on a new tie rod end
Place the end cone into the steering knuckle.
Screw a new nut on the end stud and tighten it. Use a drive socket No.18. Use a Ratchet wrench.
Tighten the clamp nut on a new tie rod end. Use a combination spanner No.19
Không có nhận xét nào:
Đăng nhận xét