Auto news on Youtube Oct 30 2017

These Lange Black Mirrors with Delrin Mirror Heads are for those of you that have a 2007

and up JK that are looking for a set of mirrors that you can run when the doors are not on

your Jeep to keep you legal and to also to keep you safe.

Now, when you're looking at mirrors there are gonna be a couple different options for

you.

You're gonna be able to get a kit that will move your factory mirrors from the doors onto

the A-pillars permanently.

They're gonna be there all the time, and then when you take the doors on and off you don't

have to worry about your mirrors.

They're always going to be there.

There are gonna be kits that will have a quick disconnect bracket that will go on your A-pillar

so you will take your doors off including your factory mirrors and then put an after-market

quick-disconnect mirror onto that bracket.

And that bracket will always be on your A-pillar but of course, the mirror will always come

off of that.

And then there is an option that is like this.

This option here is where you will take your door with the factory mirror off and then

set this setup over the top of your door hinge and that will be what holds your mirror in

place when you don't have any doors on your Jeep.

Now there is absolutely nothing wrong with this setup.

It is one additional step every time you take the door on and off you'll also have to take

mirrors on and off.

Unlike that option that moves your mirrors from the door to the A-pillar permanently.

However these mirrors are going to be a lot easier to see out of than those other versions.

Those other versions will move the mirrors forward a little bit so it's a little tougher

to see out of them especially that passenger side mirror.

So that's why a lot of people like this kit, this kit's also going to be a little bit less

expensive and it keeps a complete stock appearance of the Jeep when the Jeep is in its stock

form with the doors in place and the mirrors in the garage.

These because they are quick disconnect makes them a very easy install definitely one out

of three wrenches, five minutes or less especially after the first time when you get these things

set up.

It's gonna take no time at all to get them get popped on and off which is a really nice

feature.

As far as construction goes a couple of these items are going to be aluminum.

The rest is going to be those Delrin Mirrors Heads with of course the mirror itself which

is a plastic material.

Now the arms and the brackets are aluminum so they are going to hold up really well.

You don't have to worry about any kind of rust on these.

They're going to be just anodized aluminum.

Again they're gonna hold up really, really well for you.

And then you're going to have that Delrin Mirror Head that isn't gonna rust because

it is a plastic material, and these mirrors themselves that are plastic as well.

So everything is going to be very, very durable.

And these do come with thumb screws that's going to help these brackets tighten down

on those door hinges when you have them installed.

That way they're not gonna rattle, move around, or try and fly off on you.

So it really does come with everything you're gonna need to get these mirrors installed,

That installation process is going to be a one out of three wrench install.

Less than 15 minutes to get these installed because again they're a quick disconnect mirror.

So you're gonna be taking them on and off all the time you want that to be a very simple

process for yourself, and that's what Lange did here.

They made this very, very simple.

So all you have to do is remove your door, there is going to be a small protective button

that you're going to attach onto your door hinge.

And that's going to be for where the thumbscrews tightens down, because, of course, you don't

want that thumb screw biting directly into the painted surface of that door hinge.

So you have a little protective button there.

Then you can slide the bracket over the top of the door hinge, the mirror onto the arm

and finally attach the arm into the bracket and tighten down that thumb screw.

Now that whole process only has to happen once.

After everything is attached it's really just a one-step process of loosening up that thumb

screw and removing the whole mirror as one piece and setting it aside.

So that main assembly process is something that only has to happen once.

The rest of the install and uninstall every time you take the doors on and off is very,

very quick.

These mirrors come in at $70 which is a pretty fair price for what you're getting in my opinion.

There are going to be a lot of other mirrors out there.

A lot of them are going to be a lower quality steel and plastic construction.

You may have some issues with rusting in those scenarios.

An issue that a lot of people will have with other mirrors when they are a mirror that

is the style like the quick disconnect mirror is that they'll move, they'll either fold

down when you're at highway speed, they'll rattle so much you can hardly even see out

of them.

These ones are going to be a very solid mirror.

The way that they mount on those door hinges makes them very, very solid.

The fact that the arms are aluminum that's anodized instead of painted steel means you're

not gonna have any rust issues with those.

And then the fact that you're getting a Delrin Mirror Head again this is gonna hold up for

a very, very long time.

So I think this is a scenario where you might have to pay a few dollars more for this kit

over some of the others out there, but you're gonna get a great quality product and you're

gonna get a lot of longevity out of your dollar.

So if you're looking for a very high-quality set of quick disconnect mirrors for your JK

I definitely recommend taking a look at this option from Lange and you can find it right

here at extremeterrain.com.