Auto news on Youtube Feb 16 2019

PLEASE, LIKE, COMMENT, SHARE and SUBCRIBE my video! Thank you very much!

For more infomation >> Tangled | Best Cartoon For Children & Kids | Episode 98 - Emily Ford - Duration: 10:01.

-------------------------------------------

Cómo cambiar los amortiguadores traseros en FORD FOCUS 2 (DA) [INSTRUCCIÓN AUTODOC] - Duration: 5:07.

For more infomation >> Cómo cambiar los amortiguadores traseros en FORD FOCUS 2 (DA) [INSTRUCCIÓN AUTODOC] - Duration: 5:07.

-------------------------------------------

How to replace oil filter and engine oil on FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

Required tools: All-purpose cleaning spray

Oil filter cup socket 76-30F Impact socket №10 Impact socket №13

Ratchet wrench Torque wrench Flat screwdriver

Oil drain pan Funnel Fender cover

1. Unscrew the oil filler plug.

2. Set the car at the service pit or lift it with a hoist.

AUTODOC recommends: The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.

All work should be done with the engine stopped.

3. Undo the fasteners of the oil pan lower cover.

4. Remove the oil pan cover. Use a drive socket #10. Use a flat screwdriver. Use a ratchet wrench.

5. Put a waste oil container with at least 4 l capacity under the drainage hole.

6. Unscrew the drain plug. Use a drive socket #13. Use a ratchet wrench. Drain the used oil.

AUTODOC recommends: Caution! The oil may be hot. Wait until the oil has completely drained from the drainage hole.

7. Move the container under the oil filter.

8. Unscrew the oil filter.

9. Prepare a container for the old oil filter. Put the old oil filter in the container.

AUTODOC recommends: Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.

10. Clean the oil filter seat. Use all-purpose cleaning spray.

11. Lubricate the rubber seal of the new filter with a little amount of fresh oil.

12. Screw the new filter into its place. Use the 76-30F socket. Use a torque wrench. Tighten it to 18 nm torque.

13. Clean the area of the oil pan drainage hole.

14. Screw in the new drainage plug and tighten it. Use a drive socket #13.

Use a torque wrench. Tighten it to 27 nm torque.

15. Reinstall the oil pan lower cover. Tighten the fasteners of the oil pan lower cover.

Use a drive socket #10. Use a ratchet wrench.

16. Unscrew the oil filler plug. Insert the funnel.

17. Pour oil into the engine through the filler. Required amount of oil: 3.7 L.

AUTODOC recommends: Use the oil recommended by the manufacturer.

18. Check the oil level using the dipstick. Top up oil if necessary.

Please note! The oil level should be between the Min and Max marks.

19. Tighten the oil filler cap.

20. Run the engine for a few minutes. After the oil pressure warning light goes out, stop the engine.

21. Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.

Please note! The oil level should be between the Min and Max marks.

AUTODOC recommends: Make sure that the oil filler cap is properly tightened.

Check the threaded plug of the drainage hole and the oil filter seal for tightness. If necessary, carefully tighten them up.

Note that oil pressure warning light, which indicates insufficient pressure in the lubrication system, may be on for a longer time than usual.

After a few seconds, the oil will fill all the channels, and the light will go out.

For more infomation >> How to replace oil filter and engine oil on FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

-------------------------------------------

Ford Warns Of Moving Production From The UK Over No-Deal Brexit - Duration: 2:34.

Following Nissan's move to cancel plans to build the next-generation X-Trail in the UK, Ford has issued a strong warning to the government that it is prepared to move production out of the country

According to The Times, Ford bosses told Prime Minister Theresa May on a private call with business leaders that the company was preparing alternative manufacturing sites abroad in case of a no-deal Brexit

During the call, the head of the government said the UK was preparing a package of financial support for businesses affected by a no-deal Brexit

However, she declined to elaborate.A participant to the conference call told the paper that other companies delivered the same warning as Ford

"The general message was that this isn't about contingencies any more — we are taking steps already because of the uncertainty

It's real," the unnamed business leader said.Ford moving its manufacturing operations out of the UK would be a devastating blow to the economy, as the US-based carmaker employs 13,000 people in the country, with countless others working for its suppliers

The company has three production facilities that build engines and transmissions, as well as an R&D center in the UK, which has traditionally been at the heart of Ford's European operations alongside Germany

Ford thinks a Brexit would be catastrophic for UK car makers While the Blue Oval declined to comment on the report, the company issued a pretty strong statement

"We have long urged the UK Government and Parliament to work together to avoid the country leaving the EU on a no-deal, hard Brexit basis on March 29

Such a situation would be catastrophic for the UK auto industry and Ford's manufacturing operations in the country

We will take whatever action is necessary to preserve the competitiveness of our European business

" Ford is currently undergoing a massive restructuring process both at home and in Europe, and recently announced it would cut approximately 400 jobs at its engine plant in Bridgend, Wales (pictured)

For more infomation >> Ford Warns Of Moving Production From The UK Over No-Deal Brexit - Duration: 2:34.

-------------------------------------------

Tangled | Best Cartoon For Children & Kids | Episode 97 - Emily Ford - Duration: 10:01.

PLEASE, LIKE, COMMENT, SHARE and SUBCRIBE my video! Thank you very much!

For more infomation >> Tangled | Best Cartoon For Children & Kids | Episode 97 - Emily Ford - Duration: 10:01.

-------------------------------------------

Come sostituire filtro olio motore e olio motore su FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

For more infomation >> Come sostituire filtro olio motore e olio motore su FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

-------------------------------------------

Ford School Policy Talks - Duration: 1:19:12.

For more infomation >> Ford School Policy Talks - Duration: 1:19:12.

-------------------------------------------

Compare 2019 Subaru Outback with 2019 Ford Edge | Head to Head | Ford - Duration: 1:08.

For more infomation >> Compare 2019 Subaru Outback with 2019 Ford Edge | Head to Head | Ford - Duration: 1:08.

-------------------------------------------

Lines of Code | Built Ford Proud | Ford - Duration: 0:36.

For more infomation >> Lines of Code | Built Ford Proud | Ford - Duration: 0:36.

-------------------------------------------

Toy | Built Ford Proud | Ford - Duration: 0:36.

For more infomation >> Toy | Built Ford Proud | Ford - Duration: 0:36.

-------------------------------------------

Ako vymeniť olejový filter a motorové oleje na FORD FOCUS 2 (DA) [NÁVOD AUTODOC] - Duration: 4:19.

For more infomation >> Ako vymeniť olejový filter a motorové oleje na FORD FOCUS 2 (DA) [NÁVOD AUTODOC] - Duration: 4:19.

-------------------------------------------

Comment remplacer filtre à huile et huile moteur sur FORD FOCUS 2 (DA) [TUTORIEL AUTODOC] - Duration: 4:19.

For more infomation >> Comment remplacer filtre à huile et huile moteur sur FORD FOCUS 2 (DA) [TUTORIEL AUTODOC] - Duration: 4:19.

-------------------------------------------

Cum se înlocuiește filtru ulei si ulei motor pe FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

For more infomation >> Cum se înlocuiește filtru ulei si ulei motor pe FORD FOCUS 2 (DA) [TUTORIAL AUTODOC] - Duration: 4:19.

-------------------------------------------

Important Part | Built Ford Proud | Ford - Duration: 0:35.

For more infomation >> Important Part | Built Ford Proud | Ford - Duration: 0:35.

-------------------------------------------

Wie FORD FOCUS 2 (DA) Stoßdämpfer hinten wechseln [TUTORIAL AUTODOC] - Duration: 5:07.

For more infomation >> Wie FORD FOCUS 2 (DA) Stoßdämpfer hinten wechseln [TUTORIAL AUTODOC] - Duration: 5:07.

-------------------------------------------

FORD FOCUS 2 (DA) olajszűrő és motorolaj csere [ÚTMUTATÓ AUTODOC] - Duration: 4:19.

For more infomation >> FORD FOCUS 2 (DA) olajszűrő és motorolaj csere [ÚTMUTATÓ AUTODOC] - Duration: 4:19.

-------------------------------------------

Math | Built Ford Proud | Ford - Duration: 0:35.

For more infomation >> Math | Built Ford Proud | Ford - Duration: 0:35.

-------------------------------------------

How to replace rear shock absorber on FORD FOCUS 2 (DA)  [TUTORIAL AUTODOC] - Duration: 5:07.

Required Tools: Wire brush WD-40 spray

Copper grease Drive socket # 10 Drive socket # 13

Drive socket # 16 Combination spanner #13 Adjustable wrench

Ratchet wrench Torque wrench Wheel impact socket #19

Vice Hydraulic transmission jack Wheel chock

1. Raise the rear of the car and secure on supports.

2. Unscrew the wheel bolts. Use wheel impact socket #19. AUTODOC recommends: To avoid injury, hold up the wheel when unscrewing the bolts.

3. Support the arm. Use a hydraulic transmission jack.

4. Clean the fasteners of the shock absorber upper mount. Use a wire brush. Use WD-40 spray.

5. Unscrew the shock absorber mount fastening. Use a drive socket #10. Use a ratchet wrench.

6. Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.

7. Unscrew the lower fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench. Use a tap wrench.

AUTODOC recommends: To avoid injuries, hold the shock absorber when undoing the fastening bolts.

8. Remove the shock absorber.

9. Grip the shock absorber in a vice.

10. Clean the shock absorber rod fastener.Use a wire brush. Use WD-40 spray.

11. Remove the shock absorber piston rod fastening. Use a combination spanner #13.

12. Remove the shock absorber mount, boot and bump stop.

AUTODOC recommends: Τhoroughly examine the shock absorber mount, dust boot, bump stop. Replace them if necessary.Before installing a new shock absorber you should pump it manually 3-5 times.

13. Install the mount, boot and bump stop onto a new shock absorber.

14. Fix the shock absorber mount. Use a combination spanner #13. Use a drive socket #13.

Use a torque wrench. Use an adjustable wrench. Tighten it to 25 Nm torque.

15. Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.

16. Release the vice and take out the shock absorber.

17. Place the shock absorber in the wheel arch and secure it.

18. Install the shock absorber mount using the center hole as a guide.

AUTODOC recommends: To avoid injury, hold the shock absorber cautiously tight when screwing in the fastening bolts.

19. Support the arm. Use a hydraulic transmission jack.

20. Tighten the lower fastener of the shock absorber. Use a drive socket #16. Use a torque wrench. Tighten it to 90 Nm torque.

21. Tighten the shock absorber mount fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 50 Nm torque.

22. Remove the support from under the rear arm.

23. Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

24. Screw in the wheel bolts. Use wheel impact socket #19.

AUTODOC recommends: To avoid injury, hold up the wheel when screwing in the fastening bolts.

25. Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 110 Nm torque.