Auto news on Youtube Aug 31 2018

How to perform an OPD relearn on a Hyundai Azera using a VT56 TPMS tool

The left front center on this vehicle is not in working order

So now we're going to need to replace it with a Dynamic Pro-Select sensor

So first we need to create new sensor IDs, so we're going to go to PROGRAM,

Select the sensor what we're working with and then select the Make, Model and Year,

Select CREATE and use the GREEN button to write the sensor IDs to the new sensor.

Now that it's been successfully programmed, we'll need to write to sensor IDs to the vehicle's ECU after it's been installed to the wheel.

Now that the sensor has been installed, we need to do a relearn procedure, so we're going to go to SERVICE and

for faster Make, Model and Year selection, we're going to scan the VIN

Select OK to continue,

and we're going to go to the OBD relearn procedure icon.

We'll need to follow the steps. The first thing we need to do is activate all of the sensors starting with the left front sensor.

Now we need to repeat it for the rest of the wheels and then follow the procedures.

Now that all the sensors have been activated we're going to follow the remaining steps, so press OK to continue,

Now let's plug it into the tool,

Press OK, and

it will show you where the OBD module is going to be located and plugged in.

Now we're going to press okay to write the IDs to the ECU.

Make sure that the ignition is on, and it's a successful transfer!

Thanks for watching! For more information on ATEQ TPMS tool solutions, Visit us at ateq-tpms.com.