Thứ Hai, 28 tháng 1, 2019

Auto news on Youtube Jan 29 2019

Harman has been working with Qt for a very long time even as we built all the

infotainment systems. Harman is number one in the automotive infotainment

market and in almost all of the current generation products, the HMIs are

built with Qt. I'm very happy to have recently won the red dot design award for

product design for a concept that we showed at CES 2018 in our Mini Cooper.

The user interface design was built leveraging the Qt framework. The

concept we were showcasing was a version of a single display in a car. So no two

separate displays fort the cluster and infotainment. Just a single display in a

car does both the cluster and the infotainment function. So, we needed to

show both 2D content and 3D content on a single screen and using Qt 3D as well as

the Qt framework helped immensely in building that. One of the things we did

with the Mini Cooper was to push the boundaries in terms of leveraging a wide

variety of colors in a wide variety of actual assets like shaders in rendering

AR onto 2D screens. The other thing we did with the Mini Cooper design was to

run Qt on a very lean single SoC or a silicon chip and being able to do that

in a light way without having heavy graphics is also very important

and Qt enabled us to do that. So one of the key trends that we were observing in

automotive is this whole concept of a digital cockpit where a single SOC or a

single box can do multiple functions and run multiple screens, as we move away

from minimizing driver distraction, kind of a philosophy to you know, let's bring

the attention, let's watch more screens in our cars especially as we move into

the autonomous world. I think the future is all about 3D, augmented reality

and virtual reality. And particularly in the sense of autonomous,

it is very critical to be able to do very rich content, not blue on black

screens as is most common in automotive today, but very vibrant colors, very bright screens,

a lot of rich content and that's the future, and I think Qt is positioned well

to compete there.

For more infomation >> Built with Qt - Harman's Award-Winning Mini Cooper Cockpit - Duration: 2:43.

-------------------------------------------

Fish Biriyani in Tamil | Mini Kitchen World - Duration: 12:28.

Add Salt as required

For more infomation >> Fish Biriyani in Tamil | Mini Kitchen World - Duration: 12:28.

-------------------------------------------

Чужая ДНК. (Gacha Life) 1 серия 1 сезона. Mini-Movie - Duration: 1:04.

For more infomation >> Чужая ДНК. (Gacha Life) 1 серия 1 сезона. Mini-Movie - Duration: 1:04.

-------------------------------------------

✅ MINI GAME TRÚNG COMBO TRỊ GIÁ 4.000.000 VNĐ TẠI PU STUDIO - CHƠI TẾT RỘN RÀNG - TƯNG BỪNG AUTOTUNE - Duration: 3:56.

For more infomation >> ✅ MINI GAME TRÚNG COMBO TRỊ GIÁ 4.000.000 VNĐ TẠI PU STUDIO - CHƠI TẾT RỘN RÀNG - TƯNG BỪNG AUTOTUNE - Duration: 3:56.

-------------------------------------------

Vegetable Mini Mughlai Paratha Recipe || Moglai Porota Recipe - Duration: 10:59.

Assalamualikum.Viewers Welcome to my Channel Nazma's Cooking Studio

Dear Lovely Viewers today I will make Vegetable Mini Mughlai Paratha Recipe

Four Cups of Flour

Adding One Cup of Regular Cook Oil (half Cup + half Cup) for four cups of Flour

Adding Half TSP Salt

One TSP Sugar

Mix Properly

Need Wise Normal Water

Adding little bit regular cook oil on the dough

Covoring the dough with wet cloth resting for thirty minutes

One Bey Leave and Two Red Chilli for fring

Adding One TBSP Panchforon Masala (Mix Spice)

Half TSP Black Pepper

Half Cup of Chopped Cauliflower

Half Cup of Chopped Carrot

One fourth Cup of Chopped Tomato

One fourth Cup of Chopped Onion

Two TSP Chopped Green Chilli

Mix Spice Powder (One Bey Leave, Two Red Chilli for fring, One TBSP Panchforon Masala (Mix Spice), Half TSP Black Pepper)

Taste to Salt

Four Egg

Coating Little bit regular cook oil

After thirty minutes

Adequate Regular Cook Oil

Ready the Vegetable Mini Mughlai Paratha Recipe

Please Subscribe my Channel

Please Like, Comment and Share this Video

Thanks for Watching this Video

Allah Hafiz

For more infomation >> Vegetable Mini Mughlai Paratha Recipe || Moglai Porota Recipe - Duration: 10:59.

-------------------------------------------

Tik Tok Mini World | Bằng bằng bằng bằng bằng bằng bằng - Duration: 0:23.

For more infomation >> Tik Tok Mini World | Bằng bằng bằng bằng bằng bằng bằng - Duration: 0:23.

-------------------------------------------

BABY SHARK - Surprise Egg Mini Hulk and Batman Battle - Nursery Rhymes & Kids Song - Duration: 6:12.

Oh

it's the baby baby baby baby baby candy candy candy

it's the diamond diamond

elephants be anything

it's glasses

Hey I can't go in a blow

Impa jelly Jim Jim Kelly yip-yip Kelly J jelly

it's for keyboard keyboard keyboard K keyboard

it's the ladybug

finito No

needle

oh all right oh oh oh all right

it's a pony pony it's the clean clean clean you are

brain Oh

inspire

it's the Tyger Tyger Tyger Tyger

for umbrella umbrella umbrella you umbrella way

Wayne what way

way it's the phone

learn about Oh

why in Photoshop shoot yo yo yo yo yo yo yo

why Jojo me it's Libra Libra Libra the Libra

For more infomation >> BABY SHARK - Surprise Egg Mini Hulk and Batman Battle - Nursery Rhymes & Kids Song - Duration: 6:12.

-------------------------------------------

MİNİ ZİKZAK (TIĞ İŞİ) - Duration: 22:23.

* 3D SIMPLE CHEVRON CROCHET STITCH *

SIMPLIFIED SINGLE CROCHET CHEVRON STITCH

* REVERSIBLE *

ALSO: USEFULL INFORMATION for CHEVRONS

HOW MANY CHAINS to BEGIN with?

*MIND that MATERIALS MATTER*

The multicolor project used:

Worsted THIN baby yarns (336 m each ball)

Hook Size: 2,5 mm

It is casted on 255 chains (23 chevron repeats)

It is 74 - 75 cm wide

The bicolor project used:

Relatively THICKER baby yarns (300 m each ball)

Hook Size: 4.00 mm

It is casted on 189 chains (17 repeats)

It is 73 - 74 cm wide

The Tutorial Swatch used:

THICKER yarns (240 m each ball)

Hook Size: 5 .00 mm

It is casted on 35 chains (3 repeats)

It is 17 cm wide

THUS: Cast on as many REPEATS as you desire

*Considering the THICKNESS of yarn & size of hook*

ABOUT the CHEVRON STITCH:

*The beginning chain is straight

*Zigzags are made with PEAKs & VALLEYs

*Special selvedges for straight borders

*REPEATS have an ODD number of chains

*MORE chains on repeats make SHARPER CHEVRONS

On this Tutorial: 11 chains on repeats

A repeat of 25 chs would be V-like chevron

*The beginning and the end SHOULD be identical

FOUNDATION CHAIN:

*WHEN beginning to a BLANKET SIZE project*

MIND to make a few EXTRA chains as a precaution

CHAIN (any) multiple of ELEVEN for each repeat

On the Tutorial: 33 chains (3 repeats)

CHAIN TWO for SELVEDGES

FIRST ROW:

Insert hook into the previous chain

Make a Single Crochet (SC)

Make ANOTHER SC into the SAME chain

(This is the Beginning Edge)

Make a SC into each of the next FOUR chains

***SKIP TWO CHAINS***

Make a SC into each of the next FOUR chains

* VALLEY is made by SKIPPING 2 chains *

Make THREE SCs into the next chain

* PEAK is made with 3 SCs into the SAME chain*

SEQUENCE:

Make a SC into each of the next FOUR chains

***SKIP TWO CHAINS***

Make a SC into each of the next FOUR chains

Make THREE SCs into the NEXT chain

LAST REPEAT of the Row:

Make a SC into each of the next FOUR chains

SKIP TWO CHAINS

Make a SC into each of the next FOUR chains

*ONE remaining chain (+3 EXTRA chains)*

Make TWO SCs into the next chain

*This is how the project should look like now*

MIND the EXTRA chains at the very end

*You might NOW UNRAVEL them*

*As SHOWN*

(It was a precaution for numerous foundation chains)

Also suitable for ANY BLANKET SIZE PROJECT

ABOUT the WIDTH of the CHEVRON PROJECTS:

MIND that at the end of FIRST ROW :

The total width of the project is CLEARLY SHORTER

Due to zigzag repeats

SLIGHTLY SHORTER

On this swatch of 3 repeats of 11 chns

( MINUS 1 - 1,5 cm )

MIND that it WOULD HAVE BEEN

STILL REMARQUABLE with BLANKET size projects

FURTHERMORE:

With repeats of numerous chains

(As 25 chains in each repeat)

HIGHLY REMARQUABLE with BLANKET SIZE projects

*THUS: CHAIN MUCH MORE than the desired width*

As you CAN UNRAVEL a few undesired chns at the end

SECOND ROW:

CHAIN ONE & TURN

ATT: This DOES NOT count as a chain or edge

Make TWO SCs into the FIRST chain

*This is the BEGINNING EDGE*

FROM NOW ON:

* You will USE the BACK LOOPS ONLY (BLO) *

Make a SC (BLO) into each of the next FOUR chains

*SKIP TWO CHAINS*

Make a SC (BLO) into each of the next FOUR chains

ATTENTION:

Next chain is the MIDDLE ch of the previous PEAK

Make THREE SCs (BLO) into the next chain

CHEVRON SEQUENCE:

Make a SC (BLO) into each of the next FOUR chains

SKIP TWO CHAINS

Make a SC (BLO) into each of the next FOUR chains

*Next ch: MIDDLE ch of the previous PEAK*

Make THREE SCs into the next chain

LAST repeat of the Row:

Make a SC (BLO) into each of the next FOUR chains

SKIP TWO CHAINS

Make a SC (BLO) into each of the next FOUR chains

*ONE REMAINING CHAIN*

Make TWO SCs into the LAST chain

*This is the ENDING EDGE*

*This is how the project should look like now*

ALL NEXT ROWS:

CHAIN ONE & TURN

Make TWO SCs into the FIRST chain (Beginning Edge)

SOUNDLESS repeat of the Chevron SEQUENCE follows

Make a SC (BLO) into each of the next FOUR chains

SKIP TWO

Make a SC (BLO) into each of the next FOUR chains

Make THREE SCs into the next chain

*FIRST repeat completed*

and so on...

*2nd repeat completed*

*Last repeat completed*

Make TWO SCs into the LAST chain (Ending Edge)

And so on UNTIL the DESIRED LENGHT

*This is how the project looks like after a few rows*

*3D CHEVRON STITCH*

*REVERSIBLE*

OPTIONS:

*ADD secondary color rows within the project

With regular or irregular intervals of Main Color Rows

*Use ONE Main Color

Make ONE secondary color ROW with regular intervals

*USE a specific no of rows with ONE color

ADD the same (or more) no of rows of different colors

ALL SAMPLES on this tutorial used the other colors:

ONLY in ONE FRONT & ONE BACK ROWS

How to CHANGE color of YARN?

*MIND the 'CHAIN ONE & TURN' at the end of rows*

*CHAIN ONE & TURN with the NEW COLOR of YARN*

(You might cut or LEAVE the previous yarn at the side)

Make TWO SCs into the FIRST chain

SEQUENCE will be made continuing with the new color

THUS: Make a SC (BLO) into each of the next 4 chains

SKIP TWO

Make a SC (BLO) into each of the next FOUR chains

Make THREE SCs into the next chain

and so on...

At the end of row: Make TWO SCs into the last chain

CHAIN ONE & TURN

Make TWO SCs into the FIRST chain

Continue with the Chevron Sequence

At the end of row: Make TWO SCs into the last chain

*This is how the the Tutorial 2nd color rows are made*

CHANGE to the MAIN COLOR of YARN

CHAIN ONE & TURN

(Cut of LEAVE the secondary color yarn)

and so on...

How to FINISH the project?

When the DESIRED LENGHT is reached

Cut the Yarn & Fasten Off

MIND the REVERSE SHAPE at the ENDING ROW

How to MAKE SHARPER CHEVRONS?

You USED ELEVEN chains on this Tutorial

4 + 4 chains on each side

1 chain for the PEAK

& 2 chains for the VALLEY

SLIGHTLY SHARPER EX: (13 chains in each repeat)

1 PEAK + 2 VALLEY chns will be subtracted

THUS: 13 - 3 chains = 10 chains

10 / 2 = 5 chains on each side of the repeats

SHARPER CHEVRON EX: (25 chains in each repeat)

25 - 3 = 22 chains

22 / 2 = 11 chains on each side of the repeats

Pls look out for my other tutorials

I personally care to add ENGLISH SUBTITLES

PLS SUBSCRIBE & LIKE & SHARE

For more infomation >> MİNİ ZİKZAK (TIĞ İŞİ) - Duration: 22:23.

-------------------------------------------

[Bonsai Handmade]How To Make Mini Bonsai Tree Wire Copper 02 - Duration: 27:01.

We need 32m of copper wire. :))

Wrap them into 80 circles

And cut them into pieces of copper wire 40 cm long

Fold them together and insert 4mm beads.

Take a fear as a pillar and wrap it around with a length of 0.5 cm

With 55 pieces we divided into 5 parts.

At the rate of 20 pieces, 15 pieces, 10 pieces, 5 and 5 pieces

And start twisting them together to form small branches

Continue twisting small branches to form larger branches.

Twist until your hands are tired and you should drink water. J/K :D

And the remaining 25 pieces to make the trunk bigger.

Decide to leave a long distance between branches.

Start making the trunk bigger

Evenly divided from tree tops to stems

Try to twist tightly so that the tree does not break

Fix the trunk, start making the roots of the tree

Divide the pieces of copper wire and twist it tightly.

Finally find pots suitable for bonsai trees

I use white debris to decorate the aquarium bottom and white glue to bind bonsai plants with decorative pots.

A layer of glue and a layer of stone.

Wait 24 hours for the glue to dry.

Start removing accessories

Edit the shape of the tree.

Create corners or curves for plants to look natural

Depending on the beauty of each person, the work will be unique

Wish you complete the bonsai tree

For more infomation >> [Bonsai Handmade]How To Make Mini Bonsai Tree Wire Copper 02 - Duration: 27:01.

-------------------------------------------

Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu - Pakistan Budget 2019 Details in Urdu - Duration: 5:22.

Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu

Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu

Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu

Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu

For more infomation >> Pakistan Mini Budget 2018 2019 Highlights Discussed in Urdu - Pakistan Budget 2019 Details in Urdu - Duration: 5:22.

-------------------------------------------

MINI ROV GUARDIAN: WET TEST - Duration: 1:10.

For more infomation >> MINI ROV GUARDIAN: WET TEST - Duration: 1:10.

-------------------------------------------

CLBO Mini Humidifier - Duration: 0:55.

Add enough water into bottle

Pour 3 drops of your favorite essential oil into bottle matched with water.

Insert the bottle adapter into bottleneck

Pull upwards the mist outlet at the top and you will hear a "click"soud

Plug in the power connection

Adjust the mist amout

For more infomation >> CLBO Mini Humidifier - Duration: 0:55.

-------------------------------------------

The Wizard from Stardew Valley inking and colouring + Paint Marker mini review - Timelapse art [CC] - Duration: 5:10.

For more infomation >> The Wizard from Stardew Valley inking and colouring + Paint Marker mini review - Timelapse art [CC] - Duration: 5:10.

-------------------------------------------

mini wx hit - Duration: 1:47.

For more infomation >> mini wx hit - Duration: 1:47.

-------------------------------------------

MINI Countryman 1.6 Cooper Pepper, 5 Seats Navig., Climate, Xenon, Lichtm. velg., 5-Zitplaatsen - Duration: 1:12.

For more infomation >> MINI Countryman 1.6 Cooper Pepper, 5 Seats Navig., Climate, Xenon, Lichtm. velg., 5-Zitplaatsen - Duration: 1:12.

-------------------------------------------

3D Printed Ryzen Mini ITX Gaming PC (Avengers Theme) - Duration: 3:49.

Hi guys, In this video I'll be showing the design and build process of a 3D printed Mini

ITX case, themed with the Avengers logo - and then building a gaming pc in it - using the

Ryzen 5 2400G.

This is inspired by a video from a guy called cbutters.

He built a Mini ITX case for a very similar system.

I really liked the look so I started by duplicating his models in TinkerCAD.

Links to his video and all models can be found in the description.

TinkerCAD is really intuitive - it didn't take long to heighten the case slightly and

add the Avengers logo.

After modifying the designs and doing a little research on 3D printers, I took the plunge

and purchased an Anycubic i3 Mega.

It has a solid metal build and a heated print bed, the size of which is perfect for this

project.

I printed a number of drafts and made incremental changes each time to deal with any issues.

I also tried a number of different methods of attaching the the top part of the case

to the lower part.

Ultimately I settled on screw holes as the most reliable option.

The vertical parts of the print came out great - I really like the textured look of the layers.

The top of the case however, was the bottom layer of the print and whatever I tried in

terms of print settings, I couldn't achieve a finish I liked.

I tried sanding and spray painting but it didn't turn out much better - plus I really

liked the idea of keeping it unpainted.

In the end, I decided to try printing it without any bottom layers.

This gave me an outside layer using only infill - and a much more interesting textured finish.

Looks almost like a dark digital camo effect.

For the logo I used translucent red PLA filament.

I was hoping for a nice glassy look, but the result was more cloudy and occluded.

I tried a few prints with different slicer settings but it didn't make much difference.

After a sand and polish however, I'm pretty happy with how it turned out.

Build wise, I went for an Asrock Fatal1ty AB350 Gaming ITX board, The Ryzen 5 2400G,

A Crucial P1 500GB NVMe M.2 SSD and 16 GB of 3200 MHz Corsair Vengeance RAM.

I'm also using a One Hundred and Sixty Watt Pico Power Supply, an external power brick,

and a power button.

Links to everything I purchased can be found in the description.

So why did I go for these components?

The Ryzen 5 2400G is currently the best APU on the market in terms of graphics performance.

It doesn't have the performance of a decent discreet graphics card, but at only 65 watts

TDP, it opens up the possibility of a small low power pc that's capable of some light

1080p gaming.

I went for an NVMe drive due to better performance than SATA in most cases while not costing

a whole lot more (for this model at least), and chose fast 3200 MHz RAM because the Ryzen

architecture is particularly sensitive to RAM speeds and I wanted to make sure it had

decent headroom for gaming.

All I required in terms of the motherboard was an M.2 Slot - I wasn't too concerned about

the chipset for this build.

Finally, I threw in some red LED strips in an attempt to give the logo some glow.

...and here's the result.

After setting everything up and installing a few games I was able to achieve ballpark

60 fps at 1080p in Rocket League, Overwatch and Doom using mostly low settings.

I had to drop the resolution to 720p to get similar results from Destiny 2 and Rise of

the Tomb Raider.

The temperature hovered at around 60 degrees Celcius... with the top of the case removed.

With the case fully assembled the temperature would steadily climb to 95 degrees C!

Clearly I need to work on the thermals for this design...

And so concludes our adventure guys, If you enjoyed this video please give it a thumbs

up and subscribe to our channel!

Also, let me know if you'd be interested in seeing any follow up videos, I have a couple

of ideas...

Thanks for watching, catch you in the next one.

For more infomation >> 3D Printed Ryzen Mini ITX Gaming PC (Avengers Theme) - Duration: 3:49.

-------------------------------------------

How To Make Abundance Mini Yam Ring - Duration: 2:51.

For more infomation >> How To Make Abundance Mini Yam Ring - Duration: 2:51.

-------------------------------------------

Prise OBD One (Mini) : Où trouver mon connecteur OBD2 ? - Duration: 0:49.

Hello, welcome to this videos serie

where we show you the locations of the OBD connector on specific vehicles.

Today we will start with One,

city-dweller car of the german car manufacturer Mini.

Mini One are all compatible with the OBD standard and our Klavkarr scanner,

Sit in the cockpit of your vehicle you will find your OBD connector

at the pedals level.

The connector is near clutch pedal.

After this step you will be able to see your OBD connector.

Now you are ready to do the auto diagnosis of your car.

Find the location of the OBD connector of your vehicle,

download our free application "Where is my OBD2 port? Find it! ".

We wish you a good day and see you soon for a new tutorial

by Outils OBD Facile !

For more infomation >> Prise OBD One (Mini) : Où trouver mon connecteur OBD2 ? - Duration: 0:49.

-------------------------------------------

eployment exchange || job mela || mini job mela || kamareddy job mela || latest job mela || hyd jobs - Duration: 12:59.

MINI-JOBMELA || Mini Job Mela by Dist. Employment Exchange || A.P. Fertilizer || Varun motors pvt ltd || Apollo Pharmacy ||GS4 services || Security guards || Telecaller || slaes excuitive ||

Trainee technician Iti,fitter,dieselmech,moto rmech,electricianwelder

Không có nhận xét nào:

Đăng nhận xét