Auto news on Youtube Nov 1 2018

Use a combination spanner No.19. Loosen the lock nut securing the tie rod end to the tie rod.

Use a drive socket No.17. Loosen the lock nut securing the tie rod end to the tie rod.

Use a ball joint remover. Using a special tool push the steering rod end out of the steering knuckle.

Screw the end out of the tie rod.

Screw on a new tie rod end

Place the end cone into the steering knuckle.

Screw a new nut on the end stud and tighten it. Use a drive socket No.18. Use a Ratchet wrench.

Tighten the clamp nut on a new tie rod end. Use a combination spanner No.19

For more infomation >> Ako vymeniť čap riadenia na SUZUKI SWIFT 3 [NÁVOD AUTODOC] - Duration: 1:50.

-------------------------------------------

Cum se înlocuiește arc spirala din spate pe SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Cum se înlocuiește arc spirala din spate pe SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

-------------------------------------------

AFF Suzuki Cup 2018-ĐT Việt Nam loại 5 cầu thủ sau chuyến tập huấn tại Hàn Quốc - Duration: 4:19.

For more infomation >> AFF Suzuki Cup 2018-ĐT Việt Nam loại 5 cầu thủ sau chuyến tập huấn tại Hàn Quốc - Duration: 4:19.

-------------------------------------------

How to replace rear springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> How to replace rear springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

-------------------------------------------

Wie SUZUKI SWIFT 3 Fahrwerksfedern hinten wechseln [TUTORIAL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Wie SUZUKI SWIFT 3 Fahrwerksfedern hinten wechseln [TUTORIAL AUTODOC] - Duration: 2:17.

-------------------------------------------

Cómo cambiar la muelles de suspensión trasero en SUZUKI SWIFT 3 [INSTRUCCIÓN AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Cómo cambiar la muelles de suspensión trasero en SUZUKI SWIFT 3 [INSTRUCCIÓN AUTODOC] - Duration: 2:17.

-------------------------------------------

Como substituir molas de suspensão traseira no SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Como substituir molas de suspensão traseira no SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

-------------------------------------------

Comment remplacer ressort de suspension arrière une SUZUKI SWIFT 3 [TUTORIEL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Comment remplacer ressort de suspension arrière une SUZUKI SWIFT 3 [TUTORIEL AUTODOC] - Duration: 2:17.

-------------------------------------------

Jak wymienić zawieszenie tylne w SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.

For more infomation >> Jak wymienić zawieszenie tylne w SUZUKI SWIFT 3 [TUTORIAL AUTODOC] - Duration: 2:17.

-------------------------------------------

Suzuki S-Cross 1.6 High Executive (Panodak,Cruise,Clima,Leder) - Duration: 1:07.

For more infomation >> Suzuki S-Cross 1.6 High Executive (Panodak,Cruise,Clima,Leder) - Duration: 1:07.

-------------------------------------------

Suzuki Swift 1.2 DYNAMIC 5DRS "AUTOMAAT" AC/CRUISE/GEEN.IMPORT! - Duration: 1:11.

For more infomation >> Suzuki Swift 1.2 DYNAMIC 5DRS "AUTOMAAT" AC/CRUISE/GEEN.IMPORT! - Duration: 1:11.

-------------------------------------------

Suzuki S-Cross 1.0 Boosterjet Exclusive (Cruise,Clima,Navi) - Duration: 0:54.

For more infomation >> Suzuki S-Cross 1.0 Boosterjet Exclusive (Cruise,Clima,Navi) - Duration: 0:54.

-------------------------------------------

Suzuki Alto 1.1 GLS - Duration: 0:51.

For more infomation >> Suzuki Alto 1.1 GLS - Duration: 0:51.

-------------------------------------------

Suzuki SX4 1.6 Comfort - Duration: 0:52.

For more infomation >> Suzuki SX4 1.6 Comfort - Duration: 0:52.

-------------------------------------------

Suzuki SX4 1.6 Exclusive - Duration: 1:10.

For more infomation >> Suzuki SX4 1.6 Exclusive - Duration: 1:10.

-------------------------------------------

Suzuki S-Cross 1.6 EXCLUSIVE [NAVIGATIE, CLIMATE, TREKHAAK] - Duration: 1:08.

For more infomation >> Suzuki S-Cross 1.6 EXCLUSIVE [NAVIGATIE, CLIMATE, TREKHAAK] - Duration: 1:08.

-------------------------------------------

Kako zamenjati zadnja vzmet amortizerja na SUZUKI SWIFT 3 [VODIČ AUTODOC] - Duration: 2:17.

Raise the rear of the car and secure on supports.

Secure the rear axle beam.

Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

Carefully lower the trolley jack until the complete removal of the load from the spring.

Remove the spring. Use a crow bar.

Examine suspension spring rubber spacers. Replace them if needed.

Install the spring.

Secure the rear axle beam.

Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

Remove the mounting from under the rear axle beam.